All categories

Biaxial Welded Polyester Geogrid

2023/4/28

Product performance

　　Biaxial welded geogrid takes PET and PP as the main materials, adds anti-aging agent and other additives, and is mechanically stretched into refined ribs at low times. The geosynthetics formed by special ultrasonic welding are at right angles to the plane longitude and latitude. According to the project needs, different mesh diameters and rib widths and thicknesses are used to change the tensile force of the ribs, producing extremely high tensile modulus under low strain capacity, Fully utilizing the interlocking effect of the grid on the soil, the longitudinal and transverse ribs are woven into a web with high strength, low fracture tensile rate, and small creep coefficient. The temperature resistance range is -70 ° C to 180 ° C, with excellent UV resistance and microbial corrosion performance.

Applicable scope

　　Civil works such as roads, railways, embankments, abutments, construction roads, wharves, revetments, flood dikes, dams, mudflat treatment, freight yards, slag yards, airports, sports grounds, environmental protection buildings, soft soil foundation reinforcement, retaining wall reinforcement, high slope treatment, and exposed hydraulic works.

Technical parameter

Refer to JT/T480-2002

Bi-directional adhesive welded PP geogrid	project	Ultimate tensile strength per linear meter，KN/m≥		Nominal elongation，≤%		Tensile force at 2% elongation，KN/m≥		Tensile force at 5% elongation，KN/m≥
	project	direction	transverse	direction	transverse	direction	transverse	direction	transverse
	GSZ25	25	25	12	12	10	10	15	15
	GSZ40	40	40	12	12	20	20	25	25
	GSZ60	60	60	12	12	22	22	40	40
	GSZ80	80	80	13	13	35	35	55	55
	GSZ100	100	100	13	13	55	55	65	65
	GSZ125	125	125	13	13	60	60	90	90
	GSZ150	150	150	13	13	85	85	100	100
	Width	3-6m

Refer to Q/CR549.2-2016

Bi-directional welded PET geogrid	project	specifications
	project	GGR/PET/BW30-30	GGR/PET/BW50-50	GGR/PET/BW80-80
	Mass per unit g/㎡	≥280	≥420	≥600
	Longitudinal and transverse tensile strength KN/m	≥30	≥50	≥80
	Tensile strength at 2% elongation in both longitudinal and transverse directions KN/m	≥12	≥21	≥36
	Tensile strength at 5% elongation in both longitudinal and transverse directions KN/m	≥22	≥39	≥64
	Nominal elongation in both longitudinal and transverse directions %	≤8.0
	Ultimate peeling force of welding points N	≥100
	Inner hole size mm	30≤A≤60.30≤B≤60，A is the length of the inner hole, B is the width of the inner hole
	wide in width	3-5m

Anhui Chuangwan New Materials Co., Ltd. Copyright Anhui ICP Preparation No. 2023006138-1 {Disclaimers}